NOTE: The driver update disk (DUD) images are created only for those operating system releases in which the native
Installing or updating the RPM driver package with KMOD support
NOTE: This procedure is applicable for Red Hat Enterprise Linux 6.5 SP2.
Perform the following steps to install the RPM package with KMOD support:
1.Uncompress the gzipped tarball driver release package.
2.Install the driver package using the command: rpm
NOTE: Use rpm
3.If the previous device driver is in use, you must reboot the system for the updated driver to take effect.
4.Verify that the driver is loaded with the following system commands: modinfo megaraid_sas.
Installing or updating the RPM driver package with KMP support
NOTE: This procedure is applicable for SUSE Enterprise Linux 11 SP2.
Perform the following steps to install the RPM package with KMP support:
1.Uncompress the gzipped tarball driver release package.
2.Install the driver package using the command: rpm
NOTE: Use rpm
3.If the previous device driver is in use, you must reboot the system for the updated driver to take effect.
4.Verify that the driver is loaded with the following system commands: modinfo megaraid_sas.
61