1 | processor cover | 2 | securing tab | 3 | processor |
4 | processor socket | 5 | center cover latch | 6 | release lever |
|
|
|
|
|
|
7 | front alignment notch | 8 | socket and processor | 9 | rear alignment notch |
|
|
|
|
|
|
NOTICE: To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the processor.
5.Set the processor lightly in the socket and ensure that the processor is positioned correctly.
6.When the processor is fully seated in the socket, close the processor cover.
Ensure that the securing tab on the processor cover is positioned underneath the center cover latch on the socket.
7.Pivot the socket release lever back toward the socket and snap it into place beneath the securing tab.
NOTICE: If you are not installing a processor upgrade kit from Dell, reuse the original
If you installed a processor replacement kit from Dell, return the original
8.Install the
a.Place the
b.Rotate the
NOTICE: Ensure that the heat sink is correctly seated and secure.
9.Place the floppy ribbon cable back across the top of the processor shroud inserting the sides under the clips. Ensure that the cable does not block airflow from the fan and cooling vents
1
heat sink and fan shroud assembly
2
3
captive screw housing
(2)