3.Pry the securing clips away from the memory module until it pops up. Remove the memory module from its socket on the system board.
Installing the Memory Module
1.Insert the memory module into the socket and press to lock the securing clips.
2.Install the access panel.
3.Install the battery.
4.Follow the procedures in After Working Inside Your Computer.
Removing the WLAN Card
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.access panel
3.Remove the two connectors and the screw securing the WLAN card to the system board. Then, gently pull out the WLAN card out of its socket.
15