7.Gently pry up the palmrest and slide it from the computer.
Installing the Palmrest Assembly
1.Place the palmrest on the chassis and press the notches until it clicks in place.
2.Connect the touchpad and power cables to the system board.
3.Tighten the screws to secure it to the system board.
4.Turn the computer over and press at the edges to lock into the retaining tabs.
5.Tighten the screws at the base of the computer.
6.Install:
a.keyboard
b.memory module
c.hard drive
d.WLAN card
e.access panel
f.
g.battery
7.Follow the procedures in After Working Inside Your Computer.
19