Installing the Camera
1.Insert the camera into the display assembly.
2.Connect the camera cable.
3.Install:
a.display assembly
b.palmrest assembly
c.keyboard
d.memory module
e.hard drive
f.WLAN card
g.access panel
h.
i.battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Heatsink Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.
c.access panel
d.hard drive
e.memory module
f.keyboard
g.palmrest assembly
h.system board
29