Dell 3030 Removing the Vesa Bracket, Installing the Vesa Bracket, Removing the System Fan

Page 22

b.back cover

c.stand

d.stand cover

5.Follow the procedures in After Working Inside Your Computer.

Removing the VESA Bracket

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.stand cover

b.stand

c.back cover

3.Perform the following steps as shown in the illustration:

a.Remove the screws that secure the VESA bracket to the computer [1].

b.Remove the VESA it from the computer [2].

Installing the VESA Bracket

1.Align the VESA bracket on the computer. Tighten the screws to secure it to the computer.

2.Install:

a.back cover

b.stand

c.stand cover

3.Follow the procedures in After Working Inside Your Computer.

Removing the System Fan

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

22

Image 22

Contents OptiPlex 3030 All-in-One Page Contents Technical Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerRecommended Tools Turning Off Your ComputerAfter Working Inside Your Computer System Overview System Board Layout Page Removing the Stand Installing the StandRemoving the Back Cover Installing the Back Cover Removing the Optical DriveInstalling the Optical Drive Removing the Hard DrivePage Installing the Hard Drive Removing the Convertor BoardInstalling the Convertor Board Removing the MemoryInstalling the Memory Removing the System-Board ShieldInstalling the System-Board Shield Removing the HeatsinkInstalling the Heatsink Removing the SpeakersPage Installing the Speakers Removing the Vesa Bracket Installing the Vesa BracketRemoving the System Fan Installing the System Fan Removing the Power-Switch BoardInstalling the Power-Switch Board Removing the System BoardPage Installing the System Board Removing the Display Bracket Installing the Display Bracket Removing the Camera Installing the Camera Removing the MicrophoneInstalling the Microphone Boot Sequence Navigation KeysSystem Setup Options UefiATA Security Absolute Software KEK Power Management Post Behavior Enabled with ImageServer Updating the Bios To Static IPSystem and Setup Password Password TypePage Technical Specifications GB DDR3 Drives Feature Specification Tilt Degrees to 30 degrees Environmental Contacting Dell Contacting Dell