Dell 3030 owner manual Recommended Tools, Turning Off Your Computer

Page 6

CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

3.Disconnect all network cables from the computer.

4.Disconnect your computer and all attached devices from their electrical outlets.

5.Press and hold the power button while the computer is unplugged to ground the system board.

6.Remove the cover.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

Recommended Tools

The procedures in this document may require the following tools:

Small flat-blade screwdriver

Phillips screwdriver

Small plastic scribe

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.

1.Shut down the operating system:

In Windows 8:

Using a touch-enabled device:

a.Swipe in from the right edge of the screen, opening the Charms menu and select Settings.

b.Select the and then select Shut down

Using a mouse:

a.Point to upper-right corner of the screen and click Settings.

b.Click the and select Shut down.

In Windows 7:

1.Click Start.

2.Click Shut Down.

or

1.Click Start.

6

Image 6
Contents OptiPlex 3030 All-in-One Page Contents Technical Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerRecommended Tools Turning Off Your ComputerAfter Working Inside Your Computer System Overview System Board Layout Page Installing the Stand Removing the StandRemoving the Back Cover Installing the Back Cover Removing the Optical DriveInstalling the Optical Drive Removing the Hard DrivePage Installing the Hard Drive Removing the Convertor BoardInstalling the Convertor Board Removing the MemoryInstalling the Memory Removing the System-Board ShieldInstalling the System-Board Shield Removing the HeatsinkInstalling the Heatsink Removing the SpeakersPage Installing the Speakers Installing the Vesa Bracket Removing the Vesa BracketRemoving the System Fan Installing the System Fan Removing the Power-Switch BoardInstalling the Power-Switch Board Removing the System BoardPage Installing the System Board Removing the Display Bracket Installing the Display Bracket Removing the Camera Installing the Camera Removing the MicrophoneInstalling the Microphone Boot Sequence Navigation KeysSystem Setup Options UefiATA Security Absolute Software KEK Power Management Post Behavior Enabled with ImageServer Updating the Bios To Static IPSystem and Setup Password Password TypePage Technical Specifications GB DDR3 Drives Feature Specification Tilt Degrees to 30 degrees Environmental Contacting Dell Contacting Dell