Dell 3030 owner manual Installing the System Board

Page 26

5.Remove the system board from the computer.

Installing the System Board

1.Align the system board on the computer.

2.Tighten the screws to secure the system board to the computer.

3.Connect the following cables to the system board:

a.camera cable

b.LVDS cable

c.system fan cable

d.optical-drive cable

e.hard-drive cable

26

Image 26

Contents OptiPlex 3030 All-in-One Page Contents Technical Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerRecommended Tools Turning Off Your ComputerAfter Working Inside Your Computer System Overview System Board Layout Page Removing the Back Cover Installing the StandRemoving the Stand Installing the Back Cover Removing the Optical DriveInstalling the Optical Drive Removing the Hard DrivePage Installing the Hard Drive Removing the Convertor BoardInstalling the Convertor Board Removing the MemoryInstalling the Memory Removing the System-Board ShieldInstalling the System-Board Shield Removing the HeatsinkInstalling the Heatsink Removing the SpeakersPage Installing the Speakers Removing the System Fan Installing the Vesa BracketRemoving the Vesa Bracket Installing the System Fan Removing the Power-Switch BoardInstalling the Power-Switch Board Removing the System BoardPage Installing the System Board Removing the Display Bracket Installing the Display Bracket Removing the Camera Installing the Camera Removing the MicrophoneInstalling the Microphone Boot Sequence Navigation KeysSystem Setup Options UefiATA Security Absolute Software KEK Power Management Post Behavior Enabled with ImageServer Updating the Bios To Static IPSystem and Setup Password Password TypePage Technical Specifications GB DDR3 Drives Feature Specification Tilt Degrees to 30 degrees Environmental Contacting Dell Contacting Dell