Dell 3030 owner manual Boot Sequence, Navigation Keys

Page 32

4

System Setup

System Setup enables you to manage your computer hardware and specify BIOS‐level options. From the System Setup, you can:

•Change the NVRAM settings after you add or remove hardware

•View the system hardware configuration

•Enable or disable integrated devices

•Set performance and power management thresholds

•Manage your computer security

Boot Sequence

Boot Sequence allows you to bypass the System Setup‐defined boot device order and boot directly to a specific device (for example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:

•Access System Setup by pressing <F2> key

•Bring up the one-time boot menu by pressing <F12> key

The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot-menu options are:

•Removable Drive (if available)

•STXXXX Drive

NOTE: XXX denotes the SATA drive number.

•Optical Drive

•Diagnostics

NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup screen.

Navigation Keys

The following table displays the system setup navigation keys.

NOTE: For most of the system setup options, changes that you make are recorded but do not take effect until you re-start the system.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents OptiPlex 3030 All-in-One Page Contents Technical Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerRecommended Tools Turning Off Your ComputerAfter Working Inside Your Computer System Overview System Board Layout Page Removing the Back Cover Installing the StandRemoving the Stand Installing the Back Cover Removing the Optical DriveInstalling the Optical Drive Removing the Hard DrivePage Installing the Hard Drive Removing the Convertor BoardInstalling the Convertor Board Removing the MemoryInstalling the Memory Removing the System-Board ShieldInstalling the System-Board Shield Removing the HeatsinkInstalling the Heatsink Removing the SpeakersPage Installing the Speakers Removing the System Fan Installing the Vesa BracketRemoving the Vesa Bracket Installing the System Fan Removing the Power-Switch BoardInstalling the Power-Switch Board Removing the System BoardPage Installing the System Board Removing the Display Bracket Installing the Display Bracket Removing the Camera Installing the Camera Removing the MicrophoneInstalling the Microphone Boot Sequence Navigation KeysSystem Setup Options UefiATA Security Absolute Software KEK Power Management Post Behavior Enabled with ImageServer Updating the Bios To Static IPSystem and Setup Password Password TypePage Technical Specifications GB DDR3 Drives Feature Specification Tilt Degrees to 30 degrees Environmental Contacting Dell Contacting Dell
Top Page Image Contents