Replacing the USB Board
Procedure
1Align the screw hole on the USB board with the screw hole on the computer base.
2Replace the screw that secures the USB board to the computer base.
3Connect the
Postrequisites
1Replace the palm rest. See "Replacing the Palm Rest" on page 41.
2Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on page 29.
3Replace the base cover. See "Replacing the Base Cover" on page 20.
4Replace the keyboard. See "Replacing the Keyboard" on page 18.
5Replace the battery. See "Replacing the Battery" on page 13.
6Follow the instructions in "After Working Inside Your Computer" on page 11.
USB Board | 59 |