Replacing the Display Assembly
Procedure
1Place the display assembly in position and replace the screws that secure the display assembly to the computer base.
2Route the display cable through the routing guides and connect the display cable to the
3Route the antenna cables through the routing guides and slide the cables through the slot on the computer base.
4Close the display and turn the computer over.
5Route the antenna cables through the routing guides at the bottom of the computer.
6Connect the antenna cables to the connectors on the
Postrequisites
1Replace the palm rest. See "Replacing the Palm Rest" on page 41.
2Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on page 29.
3Replace the base cover. See "Replacing the Base Cover" on page 20.
4Replace the keyboard. See "Replacing the Keyboard" on page 18.
5Replace the battery. See "Replacing the Battery" on page 13.
6Follow the instructions in "After Working Inside Your Computer" on page 11.
Display 63