Procedure
1Close the display and turn the computer over.
2Disconnect the antenna cables from the connectors on the
3Make a note of the antenna cables routing and remove the cables from the routing guides.
4Turn the computer over and open the display as far as possible.
5Pull the antenna cables up through the slot on the computer base.
6Pull the
7Make a note of the display cable routing and remove the cable from the routing guides.
8Remove the screws that secure the display assembly to the computer base.
9Lift the display assembly off the computer base.
1 | 5 |
2 
3 
4
1 | display assembly | 2 | screws (4) |
|
|
|
|
3 | display cable | 4 | |
|
|
|
|
5 | antenna cables (2) |
|
|
|
|
|
|
62 Display