24 Replacing the System Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.
NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the system setup after you replace the system board.
Procedure
1Connect the
2Align the screw hole on the system board with the screw hole on the computer base.
3Replace the screw that secures the system board to the computer base.
4Connect the display cable to the connector on the system board.
5Adhere the
Replacing the System Board | 61 |