36 Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Place the display assembly in position and replace the screws that secure the display assembly to the computer base.
2Connect the display cable to the
3Route the antenna cables through the routing guides and slide the cables through the slot on the computer base.
4Close the display and turn the computer over.
5Route the antenna cables through the routing guides at the bottom of the computer.
6Connect the antenna cables to the connectors on the wireless
Postrequisites
1Replace the battery. See "Replacing the Battery" on page 33.
2Replace the palm rest. See "Replacing the Palm Rest" on page 29.
3Replace the keyboard. See "Replacing the Keyboard" on page 25.
4Replace the base cover. See "Replacing the Base Cover" on page 19.
5Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Display Assembly | 87 |