Procedure
1Disconnect the antenna cables from the connectors on the wireless
2Make a note of the antenna cables routing and remove the cables from the routing guides.
3Turn the computer over and open the display as far as possible.
4Pull the antenna cables up through the slot on the computer base.
5Pull the
6Remove the screws that secure the display assembly to the computer base.
7Lift the display assembly off the computer base.
1
2
4
3
1 | display assembly | 2 | screws (4) |
|
|
|
|
3 | display cable | 4 | |
|
|
|
|
86 Removing the Display Assembly