interior slide
thumbscrews (4)
green push button
)LJXUH,QVWDOOLQJWKH&RPSXWHULQWKH5DFN
3.Slide the computer into the rack until the lock engages.
At this time, the computer should not move either in or out.
NOTE: As you push the computer into the interior slides, the slide assemblies lock in the extended position. Press the green push button near the end of each interior slide to release the locks (see Figure 10), and then slide the computer completely into the rack.
4.Tighten all the
After you tighten all the mounting screws, slide the computer into and out of the rack a few times to ensure that none of the adjustments changed as you tight- ened the screws.
14 Dell PowerEdge4x00 and 6x00 SystemsRack Installation Guide