IBM TN5250 manual A Error Messages, Telnet Errors

A Error Messages

This section describes the error messages that might display on your terminal screen during a TN5250 session. These error messages are grouped into three categories:

◆Telnet errors

◆TN5250 internal errors

◆Status Line errors

Telnet Errors

Telnet errors are generated by Telnet communications software within a TN5250 terminal. These errors are related to initialization, start up, or connections during a session. They are normally due to operator error, incorrect command syntax, or network failures, and can usually be corrected by the system administrator. Table A-1 lists Telnet error messages.

Table A-1 Telnet Errors

Message	Cause	Resolution
Unable to allocate memory for	Unable to allocate memory.	See your system administrator.
xxxxxx.key
Memory allocation failure while	Unable to allocate memory.	See your system administrator.
installing multiple key
Memory allocation failure for	Unable to allocate memory.	See your system administrator.
session
Memory allocation failure for	Unable to allocate memory.	See your system administrator.
general work area
TELNET: tcp/telnet: unknown	The TCP/Telnet service is not	See your system administrator.
service	supported for the current host.
TELNET: select() failed errno =	An internal error within the	Try the connection again.
Error-Number	TN5250 client. Possible TCP/IP
	network problem.