Removing the USB Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1Remove the base cover. See "Removing the Base Cover" on page 10.
2Remove the battery. See "Removing the Battery" on page 12.
3Remove the
4Remove the wireless card. See"Removing the Wireless Card" on page 19.
5Remove the keyboard. See "Removing the Keyboard" on page 21.
6Remove the bottom cover. See "Removing the Bottom Cover" on page 25.
Procedure
1Peel off the tape that secures the
2Lift the latch and disconnect the
3Lift the USB board off the
1
2
|
| 4 | 3 |
|
|
| |
|
| 5 |
|
|
|
|
|
1 | USB board | 2 | alignment post |
|
|
|
|
3 | connector latch | 4 | securing tape |
|
|
|
|
5 |
|
| |
|
|
|
|
Removing the USB Board 37