Dell P36F, 7537 owner manual Procedure

Procedure

NOTE: Replacing the system board removes any changes you have made to the BIOS using System Setup. Enter the Service Tag of your computer in the BIOS and make the desired changes again after you replace the system board.

For more information on entering the Service Tag in the BIOS, see "Replacing the System Board" on page 49.

NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect them correctly after you replace the system board.

1Turn the computer over and open the display as far as possible.

2Lift the connector latches and disconnect the touchpad cable, status-light cable, and power-button cable from the system board.

2

3

4

1

1	power-button cable	2	connector latches (3)
3	touchpad cable	4	status-lights cable

Removing the System Board 45