Dell P36F, 7537 owner manual Replacing the Display Assembly

Replacing the Display Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Procedure

1Place the palm-rest assembly on the display assembly.

2Align the screw holes on the palm-rest assembly with the screw holes on the display hinges and pressing down on the display hinges close the palm-rest assembly.

3Replace the screws that secure the display hinges to the palm-rest assembly.

4Route the camera cable through the routing guides on the palm-rest assembly.

5Adhere the tape to the camera cable.

6Connect camera cable to the system board.

7Slide the display cable into the system board and press down on the connector latch to secure the cable.

8Adhere the tape to secure the display cable.

Postrequisites

1Replace the bottom cover. See"Replacing the Bottom Cover" on page 28.

2Replace the keyboard. See "Replacing the Keyboard" on page 24.

3Replace the wireless card. See "Replacing the Wireless Card" on page 20.

4Replace the hard drive. See "Replacing the Hard Drive" on page 18.

5Replace the battery. See "Replacing the Battery" on page 13.

6Replace the base cover. See "Replacing the Base Cover" on page 11.

Replacing the Display Assembly 55