Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
•USB Floppy — The computer attempts to boot from the USB floppy drive. If no operating system is on the floppy disk, the computer generates an error message.
•Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.
•
•USB Storage Device — Insert the memory device into a USB port and restart the computer. When F12 Boot Options appears in the
NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.
•Network — The computer attempts to boot from the network. If no operating system is found on the network, the computer generates an error message.
NOTE: To boot from the network, ensure that the Onboard LAN Boot ROM option is enabled in system setup. See "System Setup" on page 91.
100