Procedure
NOTE: Make note of the routing of all cables as you remove them so that you can
1Disconnect the front I/O panel cables from the system board connectors (AUDIOF1, USBF1, and USBF2). See "System Board Components" on page 14.
2Remove the screws that secure the front I/O panel to the front panel.
3Slide the front I/O panel towards the side as shown in the illustration to release the clamps from the front panel and pull it away.
2
1
1 | screws (2) | 2 | front I/O panel |
58
Front I/O Panel