Replacing the Front I/O Panel
Procedure
CAUTION: To avoid damage to the cable connectors and the cable routing clips, carefully slide the front I/O panel into the front I/O panel clamp slot.
1Align and slide the front I/O panel clamps into the slots on the front panel.
2Replace the screws that secure the front I/O panel to the front panel.
3Connect the front I/O panel cables to the system board connectors (AUDIOF1, USBF1, and USBF2). See "System Board Components" on page 14.
Postrequisites
1Replace the front bezel see "Replacing the Front Bezel" on page 27.
2Replace the computer cover. See "Replacing the Computer Cover" on page 19.
3Follow the instructions in "After Working Inside Your Computer" on page 11.
Front I/O Panel
59