1
2
1 | screw | 2 |
Replacing the Hall-Sensor Board
1Follow the instructions in "Before You Begin" on page 7.
2Align the screw hole on the
3Replace the screw that secures the
4Slide the
5Adhere the sponge pad to the
6Replace the hard drive (see "Replacing the Hard Drive" on page 28).
7Replace the battery (see "Replacing the Battery" on page 16).
8Replace the base cover (see "Replacing the Base Cover" on page 12).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
37