10
Display-Converter Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 15) before working inside the computer.
Removing the Display-Converter Board
1Follow the instructions in "Before You Begin" on page 7.
2Remove the base cover (see "Removing the Base Cover" on page 11).
3Remove the battery (see "Removing the Battery" on page 15).
4Disconnect the
5Remove the two screws that secure the
6Without pulling hard on the
7Disconnect the
8Lift the
39