1 | 2 |
2 | 3 |
|
4
1 | 2 | screws (2) | |
3 | display cable connector | 4 |
Replacing the Display-Converter Board
1Follow the instructions in "Before You Begin" on page 7.
2Connect the
3Align the screw holes on the
4Replace the two screws that secure the
5Connect the
6Replace the battery (see "Replacing the Battery" on page 16).
7Replace the base cover (see "Replacing the Base Cover" on page 12).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
40