Back to Contents Page
Mini PCI Card
Dell™ Inspiron™ 9300 Service Manual
Removing the Mini PCI Card
Replacing the Mini PCI Card
Removing the Mini PCI Card
CAUTION: If you are removing and/or installing a
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
NOTE:
1.Follow the instructions in "Before Working Inside Your Computer."
NOTE: If you ordered a Mini PCI card with your computer, the card is already installed. If a Mini PCI card is not already installed, see "Replacing the Mini PCI Card." If you are replacing a Mini PCI card, remove the existing card.
2.Turn the computer over and loosen the two captive screws on the Mini PCI card cover.
3.Place your finger under the cover at the indentation and lift the cover open.
4. Disconnect the antenna cables from the Mini PCI card.
1 antenna cables (2)
NOTICE: To prevent damage to the Mini PCI card connector, do not use tools to spread the securing clips that secure the card.