Back to Contents Page
USB Port Board
Dell™ Inspiron™ 9300 Service Manual
Removing the USB Port Board
Replacing the USB Port Board
Removing the USB Port Board
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1.Follow the instructions in "Before Working Inside Your Computer."
2.Remove the hinge cover.
3.Remove the keyboard.
4.Remove the display assembly.
5.Remove the palm rest.
6.Disconnect the
7.Remove the M2.5 x
1
2
3
4
5
6
7
USB port board
M2.5 x
notch
system board connector
tab
pin