2.Place the VGA connector board on the computer base and replace the two screws that secure the VGA connector board to the computer base.
3.Slide the VGA connector cable into the connector on the system board and press down on the connector latch to secure the cable.
4.Replace the middle cover (see Replacing the Middle Cover).
5.Replace the display assembly (see Replacing the Display Assembly).
6.Replace the palm rest assembly (see Replacing the Palm Rest Assembly).
7.Replace the keyboard (see Replacing the Keyboard).
8.Replace the memory module(s) (see Replacing the Memory Module(s)).
9.Replace the
10.Replace the battery (see Replacing the Battery).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.