3.Connect the antennae cables to the WLAN card.
4.Flip the computer and tighten the screws to secure the display assembly to the computer.
5.Install:
a.palmrest
b.keyboard
c.optical drive
d.hard drive
e.memory module
f.access panel
g.battery
6.Follow the procedures in After Working Inside Your Computer.
Removing the Display Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.access panel
c.memory module
d.hard drive
e.optical drive
f.keyboard
g.palmrest
3.Peel the tape that secures the display and camera cables to the system board. Disconnect the cables from their connector on the system board. Disconnect the antennae cables from the WLAN card.
4.Remove the screws that secure the display assembly to the computer and lift the display assembly off the computer.
28