Dell P28F004 owner manual Installing the Power Connector, Removing the Display Bezel

Page 30

e.keyboard

f.palmrest

g.WLAN card

h.display assembly

3.Perform the following steps as shown in the illustration:

a.Disconnect the power-connector cable and release the power-connector cable from the routing channel.

b.Remove the power connector from the computer.

Installing the Power Connector

1.Align the power connector to its position in the computer.

2.Route the power-connector cable through the routing channel.

3.Connect the power-connector cable to the system board.

4.Install:

a.display assembly

b.WLAN card

c.palmrest

d.keyboard

e.optical board

f.hard drive

g.access panel

h.battery

5.Follow the procedures in After Working Inside Your Computer.

Removing the Display Bezel

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.SD card

c.access panel

30

Image 30

Contents Regulatory Model P28F Regulatory Type P28F004 Page Contents System Setup TroubleshootingSpecifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer Click Shut DownAfter Working Inside Your Computer Removing and Installing Components System OverviewRecommended Tools Removing the SD CardInstalling the Battery Installing the SD CardRemoving the Battery Removing the Access PanelInstalling the Access Panel Installing the Memory ModuleRemoving the Memory Module Removing the Hard Drive Installing the Hard Drive Removing the Optical DriveInstalling the Optical Drive Removing the KeyboardPage Installing the Keyboard Installing the Wlan CardRemoving the Wlan Card Removing the Palmrest Page Installing the Palmrest Removing the Input/Output I/O BoardInstalling the Input/Output I/O Board Removing the System BoardInstalling the System Board Removing the Coin-Cell Battery Installing the Coin-Cell BatteryInstalling the Heatsink Removing the HeatsinkInstalling the System Fan Removing the System FanRemoving the Speakers Installing the Speakers Removing the Display Assembly TouchInstalling the Display Assembly Touch Removing the Display Assembly Installing the Display Assembly Removing the Power ConnectorInstalling the Power Connector Removing the Display BezelInstalling the Display Bezel Removing the Display Hinges Installing the Display Hinges Removing the Display PanelInstalling the Display Panel Installing the Camera Module Removing the Camera ModulePage Boot Sequence Navigation KeysSystem Setup Options Keys NavigationOption Description Is Enabled Sata ODDDisabled EnabledSet Updating the Bios System and Setup PasswordPassword Type Assigning a System Password and Setup Password Page Enhanced Pre-Boot System Assessment ePSA Diagnostics Device Status LightsIcon Description Battery Status Lights Code Cause and Troubleshooting StepsBeep Codes LED Error Codes No memory/RAM detectedSpecifications Feature DescriptionFeature UMAFeature Latitude Active area Axis Physical Non-TouchContacting Dell