Dell P28F004 owner manual Installing the Display Assembly, Removing the Power Connector

Installing the Display Assembly

1.Place the display assembly on the computer.

2.Tighten the screws to secure the display assembly to the computer.

3.Connect the antennae cables to the WLAN card.

4.Connect the display and power-connector cables to the system board.

5.Affix the tape that secures the display and camera cable to the computer.

6.Install:

a.palmrest

b.keyboard

c.optical drive

d.hard drive

e.memory module

f.access panel

g.battery

7.Follow the procedures in After Working Inside Your Computer.

Removing the Power Connector

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.access panel

c.hard drive

d.optical drive

29