Installing the Base Cover
1.Slide in and place the base cover to align with the screw holes correctly on the computer.
2.Tighten the screws to secure the base cover to the computer.
3.Install the battery.
4.Follow the procedures in After Working Inside Your Computer.
Removing the Primary Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)battery
b)base cover
3.Pry the retention clips away from the memory until it pops up. Lift the memory and remove it from the computer.
Installing the Primary Memory
1.Insert the memory into the memory socket.
2.Press down the memory to secure the memory to the system board.
3.Install the:
a)base cover
b)battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Secondary Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)battery
b)keyboard trim
c)keyboard
NOTE: The secondary memory is located below the keyboard.
3.Pry the retention clips away from the memory module until it pops up. Lift up the memory module and remove it from the computer.
21