Dell M4800 owner manual Installing the Video-Card Fan, Removing the Coin-Cell Battery

Page 28

Installing the Video-Card Fan

1.Connect the video-card fan cable.

NOTE: Ensure that the video-card fan cable does not protrude outside its compartment.

2.Insert the video-card fan into its slot and tighten the screws to secure it to the computer.

3.Install the:

a)base cover

b)battery

4.Follow the procedures in After Working Inside Your Computer.

Removing the Coin-Cell Battery

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)battery

b)base cover

3.Disconnect the coin-cell battery cable. Pry the coin-cell battery upward and remove it from the computer.

28

Image 28

Contents Regulatory Model P20E Regulatory Type P20E001 Dell Inc. All Rights Reserved Contents System Setup Installing the Power-Connector PortTroubleshooting Your Computer DiagnosticsContacting Dell Page Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer Recommended ToolsClick Shut Down After Working Inside Your Computer Page Removing and Installing Components System OverviewInstalling the SD Card Removing the Secure Digital SD CardRemoving the Battery Installing the ExpressCardRemoving the ExpressCard Installing the Battery Removing the Micro Subscriber Identity Module SIM CardInstalling the Keyboard Trim Installing the Micro Subscriber Identity Module SIM CardRemoving the Keyboard Trim Removing the Keyboard Page Installing the Keyboard Removing the Base Cover Lift and remove the base cover from the computer Installing the Base Cover Installing the Primary MemoryRemoving the Primary Memory Removing the Secondary MemoryInstalling the Secondary Memory Removing the Optical DriveInstalling the Optical Drive Removing the Hard Drive Installing the Hard Drive Removing the Wireless Local Area Network Wlan CardInstalling the Wireless Local Area Network Wlan Card Removing Wireless Wide Area Network Wwan Card OptionalInstalling the Wireless Wide Area Network Wwan Card Optional Removing the Processor FanInstalling the Processor Fan Removing the Video-Card FanInstalling the Video-Card Fan Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the PalmrestPage Installing the Palmrest Removing the ExpressCard Module Installing the ExpressCard Module Installing the Processor Heat-Sink Removing the Processor Heat-SinkRemoving the Processor Installing the ProcessorRemoving The Video-Card Heat Sink Page Installing the Video-Card Heat Sink Removing the Video CardInstalling the Video Card Removing the Input/Output I/O BoardInstalling the I/O Board Removing the Switch Board Installing the Switch BoardInstalling the USH Board Removing the Unified Security Hub USH BoardRemoving the Display Assembly Page Installing the Display Assembly Installing the Hinge Cover Removing the Hinge CoverRemoving the System Board Page Installing the System Board Removing the Power-Connector Port Installing the Power-Connector Port Removing the Display BezelInstalling the Display Bezel Removing the Display Panel Page Page Installing the Camera Installing the Display PanelRemoving the Camera Page Navigation Keys Boot SequenceKeys Navigation System Setup Options Battery InformationBoot Sequence Advanced Boot OptionsOption Description Date/TimeOption Description Integrated NIC Parallel PortUSB Configuration Enable Boot SupportEnable USB 3.0 Controller Enable External USB PortSwitchable Graphics Option Description Miscellaneous DevicesBoard devices. The options are Option Description LCD BrightnessPassword Configuration Password BypassPassword Change Non-Admin Setup ChangesOption Description Admin Setup Lockout Option Description Secure Boot EnableDefault Setting Enable Intel SpeedStep Expert Key ManagementDefault Setting Enable Intel TurboBoost Wireless Radio ControlOption Description Limit Cpuid Intel TurboBoostAdvanced Battery Charge ConfigurationPrimary Battery Configuration Battery Slice ConfigurationModule Bay Battery Charge Enable Adapter Warnings Default SettingTouchpad/PS-2 Mouse Default Setting Numlock EnableEnable Intel Virtualization Technology Default Setting Option Description Wireless SwitchSwitch. The options are BluetoothUpdating the Bios System and Setup PasswordClick Drivers & Downloads ComputerAssigning a System Password and Setup Password Computer reboots Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Storage LED Power LED Wireless LED Fault Description Device Status LightsBattery Status Lights Technical SpecificationFeature Specification AlternatelyDDR3L Nvidia Quadro K5100M, 8GB GDDR5 Vram Feature M4800 M6800 Japan 90 keys Coin-cell battery CR2032 lithium ion cell Physical M4800 M6800 Feature Specification Page Contacting Dell Contacting Dell