Dell M4800 owner manual Installing the Processor Fan, Removing the Video-Card Fan

Page 27

Installing the Processor Fan

1.Connect the processor-fan cable.

NOTE: Ensure that the processor-fan cable does not protrude outside its compartment.

2.Insert the processor fan into its slot in the computer.

3.Tighten the screws that secure the processor fan to the computer.

4.Install the:

a)base cover

b)battery

5.Follow the procedures in After Working Inside Your Computer.

Removing the Video-Card Fan

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)battery

b)base cover

3.Perform the following steps to remove the video-card fan.

a)Disconnect the video-card fan cable.

b)Remove the screws that secure the video-card fan to the computer.

c)Remove the video-card fan from the computer.

27

Image 27

Contents Regulatory Model P20E Regulatory Type P20E001 Dell Inc. All Rights Reserved Contents Installing the Power-Connector Port System SetupDiagnostics Troubleshooting Your ComputerContacting Dell Page Before Working Inside Your Computer Working on Your ComputerRecommended Tools Turning Off Your ComputerClick Shut Down After Working Inside Your Computer Page System Overview Removing and Installing ComponentsRemoving the Secure Digital SD Card Installing the SD CardInstalling the ExpressCard Removing the BatteryRemoving the ExpressCard Removing the Micro Subscriber Identity Module SIM Card Installing the BatteryInstalling the Micro Subscriber Identity Module SIM Card Installing the Keyboard TrimRemoving the Keyboard Trim Removing the Keyboard Page Installing the Keyboard Removing the Base Cover Lift and remove the base cover from the computer Removing the Secondary Memory Installing the Base CoverInstalling the Primary Memory Removing the Primary MemoryRemoving the Optical Drive Installing the Secondary MemoryInstalling the Optical Drive Removing the Hard Drive Removing Wireless Wide Area Network Wwan Card Optional Installing the Hard DriveRemoving the Wireless Local Area Network Wlan Card Installing the Wireless Local Area Network Wlan CardRemoving the Processor Fan Installing the Wireless Wide Area Network Wwan Card OptionalRemoving the Video-Card Fan Installing the Processor FanRemoving the Coin-Cell Battery Installing the Video-Card FanRemoving the Palmrest Installing the Coin-Cell BatteryPage Installing the Palmrest Removing the ExpressCard Module Installing the ExpressCard Module Removing the Processor Heat-Sink Installing the Processor Heat-SinkInstalling the Processor Removing the ProcessorRemoving The Video-Card Heat Sink Page Removing the Video Card Installing the Video-Card Heat SinkRemoving the Input/Output I/O Board Installing the Video CardInstalling the I/O Board Installing the Switch Board Removing the Switch BoardRemoving the Unified Security Hub USH Board Installing the USH BoardRemoving the Display Assembly Page Installing the Display Assembly Removing the Hinge Cover Installing the Hinge CoverRemoving the System Board Page Installing the System Board Removing the Power-Connector Port Removing the Display Bezel Installing the Power-Connector PortInstalling the Display Bezel Removing the Display Panel Page Page Installing the Display Panel Installing the CameraRemoving the Camera Page Boot Sequence Navigation KeysKeys Navigation Advanced Boot Options System Setup OptionsBattery Information Boot SequenceParallel Port Option DescriptionDate/Time Option Description Integrated NICEnable External USB Port USB ConfigurationEnable Boot Support Enable USB 3.0 ControllerOption Description LCD Brightness Switchable GraphicsOption Description Miscellaneous Devices Board devices. The options areNon-Admin Setup Changes Password ConfigurationPassword Bypass Password ChangeExpert Key Management Option Description Admin Setup LockoutOption Description Secure Boot Enable Default Setting Enable Intel SpeedStepIntel TurboBoost Default Setting Enable Intel TurboBoostWireless Radio Control Option Description Limit CpuidBattery Slice Configuration Advanced Battery ChargeConfiguration Primary Battery ConfigurationNumlock Enable Module Bay Battery ChargeEnable Adapter Warnings Default Setting Touchpad/PS-2 Mouse Default SettingBluetooth Enable Intel Virtualization Technology Default SettingOption Description Wireless Switch Switch. The options areComputer Updating the BiosSystem and Setup Password Click Drivers & DownloadsAssigning a System Password and Setup Password Computer reboots Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsPage Device Status Lights Storage LED Power LED Wireless LED Fault DescriptionAlternately Battery Status LightsTechnical Specification Feature SpecificationDDR3L Nvidia Quadro K5100M, 8GB GDDR5 Vram Feature M4800 M6800 Japan 90 keys Coin-cell battery CR2032 lithium ion cell Physical M4800 M6800 Feature Specification Page Contacting Dell Contacting Dell