Back to Contents Page
Power Management Controller Board - Hall
Dell™ XPS™ M1730 Service Manual
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
1.Follow the procedures in Before You Begin.
2.Remove the palm rest (see Palm Rest).
3.Remove the card with internal bluetooth® wireless technology (see Removing the Card With Bluetooth® Wireless Technology).
4.Remove the consumer infrared board (see Removing the Consumer Infrared Board).
5.Remove the two screws that secure the power management controller to the computer base.
1 | screws (2) | 2 | connector |
|
|
|
|
6.Lift the power management controller to disconnect it from the system board.