Removing the Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.cover
b.air tunnel (if available)
3.Press down on the
Installing the Memory
1.Insert the memory module into the memory socket.
2.Press down on the memory module until the securing clips secure the memory in place.
3.Install:
a.air tunnel (if available)
b.cover
4.Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.cover
b.air tunnel (if available)
3.Press the release latch away from the battery to allow the battery to
24