6.Slide the opposite edge of the I/O panel outward to disengage the I/O module from the chassis.
7.Remove the screws that secure the USB 3.0 module to the I/O panel and remove it from the computer.
8.Remove the screws that secure the I/O panel and remove it from the computer.
Installing the I/O Panel and the USB 3.0 Ports
1.Place the USB 3.0 module of the I/O panel and install the screws to secure it in place.
2.Place the I/O panel and install the screws to secure it in place.
3.
4.Install the screws that secure the I/O panel to the chassis.
5.Connect all the cables to the I/O panel.
33