Dell T7610 Option Description Date/Time, Option Description Integrated NIC, Serial Port, Drives

Option		Description
Date/Time		Allows you to set the date and time. The
		changes to the system date and time takes
		effect immediately.
Table 3. System Configuration
Option	Description
Integrated NIC	Allows you to configure the integrated network controller. The options
	are:
	•	Disabled
		NOTE: You can use the Disabled option, only if Active
		Management Technology (AMT) option is disabled.
	• Enable UEFI Network Stack
	•	Enabled (Default)
	•	Enabled w/PXE
Integrated NIC 2	Allows you to control on-board LAN controller. The options are:
	•	Enable (Default)
	•	Enable w/PXE
		NOTE: This feature is supported only on T7610
Serial Port	Identifies and defines the serial port settings. You can set the serial port
	to:
	•	Disabled
	•	COM1 (Default)
	•	COM2
	•	COM3
	•	COM4
		NOTE: The operating system may allocate resources even if the
		setting is disabled.
SATA Operation
T3610 and T5610	Allows you to configure the internal SATA hard-drive controller. The
	options are:
	•	Disabled
	•	ATA
	•	AHCI (Default)
	•	RAID On
		NOTE: SATA is configured to support RAID mode. No SATA
		operation support in T7610.
Drives
T3610 and T5610	Allows you to configure the SATA drives on board. The options are:
	•	SATA3–HDD0

55