Dell 610 manual Expansion card Expansion-card Connectors Card-edge connector

After all legacy cards have been configured by the operating system or with the ICU, the computer automatically assigns any required memory space, IRQ lines, and DMA channels to any installed Plug and Play ISA expansion cards and PCI expansion cards the next time the computer is rebooted. Chapter 4, “Using the ISA Configuration Utility,” in the Dell Precision WorkStation 610 Mini Tower Systems User’s Guide describes the ICU and provides instructions for using it to configure the computer.

There are seven expansion-card connectors (see Figure 1-4) on the system board. Expansion-card connectors PCI1 through PCI5 support 32-bit PCI expansion cards; expansion-card connector AGP supports a 32-bit 2X AGP expansion card; and expansion-card connector ISA1 can accommodate an 8- or 16-bit ISA expansion card.

NOTES: Connector ISA1 shares expansion-slot space with connector PCI5. Therefore, only one card of either type can be installed in this slot.

PCI4 has a connector extension to support a PCI RAID controller (see Figure 1-11for the location of the PCI connectors).

expansion card	expansion-card
	connectors (7)

card-edge connector

System Overview 1-5