Dell 610 manual 5HPRYLQJDQG5HSODFLQJ3DUWV, 5HFRPPHQGHG7RROV

& + $ 3 7 ( 5 ￿ ￿

5HPRYLQJ￿DQG￿5HSODFLQJ￿3DUWV

This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell Precision 610 mini tower systems.

Unless otherwise noted, each procedure assumes the following:

‡You have performed the steps in “Precautionary Measures” found later in this chapter.

‡You have removed the computer cover.

‡You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided.

5HFRPPHQGHG￿7RROV

Most of the procedures in this chapter require the use of one or more of the following tools:

‡Small flat-blade screwdriver

‡Wide flat-blade screwdriver

‡#1 and #2 Phillips-head screwdrivers

‡1/4-inch nutdriver

‡Tweezers or long-nose pliers

Also, use a wrist grounding strap as explained in the next section, “Precaution- ary Measures.”

Removing and Replacing Parts 4-1