Dell 610 manual 7DEOH2SWLRQ$6\VWHP6HWXS2SWLRQVXQFWLRQ, Automatic

7DEOH2SWLRQ$￿￿￿6\VWHP6HWXS2SWLRQV)XQFWLRQ

Time	Resets time on computer’s internal clock.
Date	Resets date on computer’s internal calendar.
Diskette Drive A	Identifies type of diskette drives installed.
Diskette Drive B	Option settings always match physical loca-
	tions of drives in computer. Tape drives are not
	reflected in these options.
Primary Drive n	Identifies drives attached to the IDE1 and IDE2
Secondary Drive n	connectors on system board. Each EIDE con-
	nector supports two EIDE drives (Drive 0 and
	Drive 1).
	For EIDE hard-disk drives, the system provides
	an automatic drive-type detect feature. To use
	this feature, highlight the appropriate Drive
	option, press <Enter>, and then type a (for
	automatic).
	If none of the supported drive types matches
	the parameters of the new drive, enter param-
	eters directly. To do so, highlight the appropri-
	ate Drive option (Drive 0 or Drive 1), press
	<Enter>, and then type u to display User1.
	Press <Tab> to highlight each of the parameter
	fields in succession, and enter the appropriate
	number for each field.
	NOTE: For EIDE devices such as EIDE
	CD-ROM drives and EIDE tape drives that are
	using the built-in EIDE controller, set the
	appropriate Drive option to Auto.
Drive Sequence	Lists installed adapter cards and devices in the
	order they will be initialized.
Boot Sequence	Lists the order of the devices from which the
	system attempts to boot.
System Memory	Indicates the entire amount of installed mem-
	ory detected in your system.
Reserved Memory	Designates a region of system board memory
	that can be supplied by an expansion card.
	This feature should not be enabled unless an
	expansion card that requires special address-
	ing is installed.
CPU Speed	Indicates processor speed at which system
	boots—the processor’s rated speed or a
	slower compatibility speed, which disables
	cache.

System Setup Program A-3