Win 7 and Win | The cursor does |
8 Calibration | not accurately |
| follow your finger |
| when you touch |
| the screen |
•Enter control panel to choose the Tablet PC settings.
•Select Calibration.
•Recalibrate your screen following the text on the screen
•Save or give up the calibrate data.
Product Specific Problems
Specific | What You | Possible Solutions |
Symptoms Experience
Screen image is | Image is |
too small | centered on |
| screen, but does |
| not fill entire |
| viewing area |
•Check the Scaling Ratio setting in the Image Setting OSD.
•Reset the monitor to Factory Settings.
Cannot adjust | OSD does not | • Turn off the monitor, unplug the power cord, plug it back, |
the monitor | appear on the | and then turn on the monitor. |
with the | screen | • Check whether the OSD menu is locked. If yes, press and |
buttons on the |
| hold the button above the Power button for 10 seconds to |
side panel |
| unlock (for more information, see Menu Lock). |
|
|
|
No Input Signal | No picture, the | • Check the signal source. Ensure the computer is not in the |
when user | LED light is blue. | power saving mode by moving the mouse or pressing any |
controls are |
| key on the keyboard. |
pressed |
| • Check whether the signal cable is plugged in properly. Re- |
|
| plug the signal cable if necessary. |
|
| • Reset the computer or video player. |
The picture | The picture |
does not fill the | cannot fill the |
entire screen. | height or width |
| of the screen |
•Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.
•Run the
NOTE: When choosing
48 Troubleshooting