Dell 2009W appendix Using the On-Screen Display OSD Menu, Accessing the Menu System

Page 12

C

Use this button for direct access to the "Brightness" and "Contrast" control menu.

Brightness/Contrast

Hot Key

C

Use these buttons to navigate and adjust the slider-bar (decrease/increase ranges) controls in the OSD.

and

 

 

D

 

 

 

Down (-) and Up (+)

D

Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self-

 

adjusts to the current input:

 

Auto Adjust

 

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune

 

your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under DISPLAY SETTINGS.

 

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

 

 

 

E

Use the Power button to turn the monitor on and off.

 

The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

 

Power button

 

(with power light

 

indicator)

 

 

 

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1.Push the MENU button to launch the OSD menu and display the main menu.

Main Menu for Analog (VGA) Input

or

Main Menu for non Analog (non VGA) Input

NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.

2.Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.

3.Push the MENU button once to activate the highlighted option.

4.Push the and buttons to select the desired parameter.

5.Push to enter the slide bar and then use the or button, according to the indicators on the menu, to make your changes.

6.Select the "back" option to return to the main menu or "exit" to exit the OSD menu.

Icon

Menu and

Description

Submenus

 

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents About Your Monitor Solving Problems Dell 2009W Flat Panel Monitor Users GuideProduct Features Identifying Parts and Features Front ViewAbout Your Monitor Front View Front panel controls Label DescriptionUSB connectors downstream Left view Right view Back ViewSide View Back view Back View with monitor stand LabelMonitor Specifications Power Management ModesBottom View Pin Pin Side of the Connected Signal Cable Number Pin AssignmentsTmds RX1 Transfer speed Data Rate Power Consumption Pin Number Pin Side ConnectorPin Number Pin Side Signal Cable Universal Serial Bus USB InterfaceFlat Panel Specifications Plug and Play CapabilityPage Appendix Using the Front Panel Operating the MonitorFront panel Button Input Source Select Description OSD Menu/SelectUsing the On-Screen Display OSD Menu Accessing the Menu SystemIcon Menu Description Submenus Use this menu to activate Brightness/Contrast adjustment Select to exit the main menuBack Exit MenuVGA/DVI-D Display Settings Display Setting submenuPage Page Page Page Page Setting Up the Monitor Connecting Your MonitorAttaching the Stand Organizing the Cables Attaching the SoundbarRemoving the Stand Solving Problems Troubleshooting Your MonitorCommon Problems Common Symptoms What You Possible Solutions ExperienceInformation, see Power Management Modes
Top Page Image Contents