NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup:
•Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
•Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.)
•Plug the power cables for your computer and monitor into a nearby outlet.
•Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
•Use the cable holder on the monitor stand to organize the cables.
Organizing the Cables
After attaching all the necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above.