Dell 2009W appendix Plug and Play Capability, Flat Panel Specifications

Page 8

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identificat Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select differe

information about changing the monitor settings, see Operating the Monitor.

Flat Panel Specifications

Screen type

 

Active matrix - TFT LCD

Screen dimensions

 

20 inches (20-inch viewable image size)

Preset display area:

 

 

Horizontal

 

433.44 mm (17.06 inches)

Vertical

 

270.90 mm (10.67 inches)

Pixel pitch

 

0.258 mm

Viewing angle

 

160° (vertical) typ, 170° (horizontal) typ

Luminance output

 

300 cd/m ²(typ)

Contrast ratio

 

1000 to 1 (typ)

Dynamic contrast ratio

 

2000 to 1 (typ)

Faceplate coating

 

Antiglare with hard-coating 3H

Backlight

 

CCFL (4) edgelight system

Response Time

 

5ms typical

Color gamut (Typical)

102%*

 

 

 

* 2009W color gamut (typical) is based on CIE1976 (102%) and CIE1931 (92%) test standards.

Image 8
Contents About Your Monitor Solving Problems Dell 2009W Flat Panel Monitor Users GuideProduct Features Identifying Parts and Features Front ViewAbout Your Monitor Front View Front panel controls Label DescriptionUSB connectors downstream Left view Right view Back ViewSide View Back view Back View with monitor stand LabelBottom View Monitor SpecificationsPower Management Modes Pin Pin Side of the Connected Signal Cable Number Pin AssignmentsTmds RX1 Transfer speed Data Rate Power Consumption Pin Number Pin Side ConnectorPin Number Pin Side Signal Cable Universal Serial Bus USB InterfaceFlat Panel Specifications Plug and Play CapabilityPage Appendix Using the Front Panel Operating the MonitorFront panel Button Input Source Select Description OSD Menu/SelectIcon Menu Description Submenus Using the On-Screen Display OSD MenuAccessing the Menu System Use this menu to activate Brightness/Contrast adjustment Select to exit the main menuBack Exit MenuVGA/DVI-D Display Settings Display Setting submenuPage Page Page Page Page Attaching the Stand Setting Up the MonitorConnecting Your Monitor Organizing the Cables Attaching the SoundbarRemoving the Stand Solving Problems Troubleshooting Your MonitorCommon Problems Common Symptoms What You Possible Solutions ExperienceInformation, see Power Management Modes