D
Power Button &
Indicator
The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
On Screen Menu/Display (OSD)
Direct-Access Functions
Function | Adjustment Method |
|
|
| |
Auto adjustment | Use this button to activate automatic setup and adjustment. The | ||||
| following dialog will appear on screen as the monitor | ||||
| the current input: |
|
|
| |
|
|
|
| ||
|
|
| Auto Adjust In Progress |
| |
| Auto Adjustment | button allows the monitor to | |||
| the incoming video signal. After using 'Auto Adjustment', you can | ||||
| further tune your monitor by using the 'Pixel Clock' and 'Phase' | ||||
| controls in the OSD. |
|
|
| |
| NOTE: Auto Adjust will not occur if you press the button while | ||||
| there are no active video input signals, or attached cables | ||||
Brightness / Contrast | With the menu off, push | button to display the 'Brightness' and | |||
| |||||
| 'Contrast' adjustment menu. |
|
| ||
The 'Brightness' function adjusts the luminance of the flat panel.
Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary.
"+" increase 'brightness' " - "decrease 'brightness'
The 'Contrast' function adjusts the degree of difference between darkness and lightness on the display screen.
"+" increase the 'contrast'
Accessing the Menu System
1. With the menu off, push the 'MENU' button to open the OSD system and display the main features menu.