Dell P2012H manual Auto Adjust Input Source Auto Select, DVI-D Color Settings Input Color Format

Auto Adjust

Input Source

Auto Select

VGA

DVI-D Color Settings

Input Color Format

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector.

Use the Input Source menu to select between different video signals that may be connected to your monitor.

Push to select the Auto Select, the monitor will auto detect either VGA input or DVI-D input or DislpayPort input.

Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.

Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.

Use the Color Settings to adjust the color setting mode and color temperature. There are different color setting sub-menus for VGA/DVI-D and Video input.

Allows you to set the video input mode to:

RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter.

YPbPr: Select this option if your DVD player supports only YPbPr output.