Dell 4647115 Maintenance Guidelines, Plug and Play Capability, LCD Monitor Quality & Pixel Policy

Dell P170S/P190S Flat Panel Monitor User's Guide
Humidity
Operating	10% to 80% (non-condensing)	10% to 80% (non-condensing)
Non-operating	Storage: 5% to 90% (non-condensing)	Storage: 5% to 90% (non-condensing)
	Shipping: 5% to 90% (non-condensing)	Shipping: 5% to 90% (non-condensing)
Altitude
Operating	3,048 m (12,000 ft) max	3,048 m (12,000 ft) max
Non-operating	9,144 m (40,000 ft) max	9,144 m (40,000 ft) max
Thermal dissipation	171.00 BTU/hour (maximum)	181.26 BTU/hour (maximum)
	75.24 BTU/hour (typical)	85.50 BTU/hour (typical)

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, the user can select different settings, but in most cases monitor installation is automatic.

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information, see Dell Support site at: support.dell.com.

Maintenance Guidelines

Caring for Your Monitor

WARNING: Read and follow the Safety Instructions before cleaning the monitor.

WARNING: Before cleaning the monitor, unplug the monitor from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.

If you notice a white powder when you unpack your monitor, wipe it off with a cloth.

Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than lighter-colored monitors.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use. Back to Contents Page

file:///S/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]