Back
Mode
NOTE: When using DVI source, the contrast adjustment is not available.
Push 
to go back to the main menu.
Use 
and 
buttons to browse and 
to select Picture by Picture (PBP) "On" or "Off".
PBP Source
Preset Modes
Contrast
Hue
Saturation
Exit Menu
Select an input signal for Picture by Picture (PBP).
Use 
and 
buttons to browse and 
to select.
You can choose different color presets for different viewing modes. Desktop mode is for desktop applications. (DVI input source only.) sRGB mode emulate 72% NTSC color. (DVI input source only.)
Movie mode is suitable for movie playback. (Video input sources only.
Nature mode is suitable for nature scenes. (Video input sources only.
Use 
and 
buttons to browse and 
to select
Adjust the contrast level of the picture in Picture by Picture (PBP) Mode. 
button reduce the contrast.
button increases the contrast.
NOTE: Contrast adjustment only available for video input.
This function shifts the color of Picture by Picture (PBP) image to green or purple. This is used to adjust for desired flesh tone color.
Use 
and 
buttons to adjust the hue from '0' to '100'. 
makes video image shade into greenish.
makes video image shade into purplish.
NOTE: Hue adjustment only available for video input.
Adjust the color saturation of Picture by Picture (PBP) image.
Use 
and 
buttons to adjust the saturation from '0' to '100'. 
button makes the image look more monochrome.
button makes the image look more colorful.
NOTE: Saturation adjustment only available for video input.
Push 
to exit the OSD main menu.
OSD Warning Messagess
When the monitor does not support a particular resolution mode you will see the following message :
or